PRODUCTS
PRODUCTS
Long shaft deep well pump
Category:Long shaft deep well pump
The long shaft deep well pump is composed of working parts (impeller, guide casing, etc.), lifting pipe parts, transmission shaft, pump base parts and prime mover. It is widely used in deep wells, pools (wells) and open water sources, especially for water supply and drainage, industrial processes, municipal tap water and fire protection systems. Wide range of applications.
Product Accessories:
Long shaft deep well pump Details Description
The long shaft deep well pump is composed of working parts (impeller, guide casing, etc.), lifting pipe parts, transmission shaft, pump base parts and prime mover. It is widely used in deep wells, pools (wells) and open water sources, especially for water supply and drainage, industrial processes, municipal tap water and fire protection systems. Wide range of applications.
This product can be driven by an electric motor or a diesel engine, ensuring a satisfactory level for different applications.
• Flow Q=3～2400(3600)m3/h
• Lift Hmax=400m
• Diameter D=100~500mm
• Supporting power Nmax=1800kW
Deep well pump model description
Long axis deep well pump structure
Product main features
• hydraulic properties
All hydraulic models of long-axis deep well pumps and well submersible pumps of Nanjing Better Pump Co., Ltd. are designed with reference to Goulds Company of the United States and produced in Nanjing. The impeller and the middle casing adopt the mixed-flow hydraulic design. With the increase of the flow rate, the power tends to decrease, and the full head will not be overloaded. It can minimize the impact loss of the radial blade flow channel, improve the hydraulic performance of the pump, and save energy. Reduce wear, vibration and noise caused by excessive impact.
• structure
A layer of epoxy resin with a thickness of 0.2-0.3 mm is sintered in the flow channel of the impeller and the guide shell. It has a certain degree of corrosion resistance and wear resistance, which greatly reduces the surface roughness of the flow channel, which is conducive to improving the efficiency of the water pump.
Copper bearings are used in the diversion shell, and the copper bearings run smoothly.
The method of flame straightening is used to eliminate the internal drawing stress of the impeller shaft and transmission shaft, so that after the shaft is straightened, the shaft will not be bent again due to the release of the internal drawing stress of the shaft.
The length of each lift pipe is 2.5m (each submersible pump is 3m), connected by thread or flange, easy to assemble and disassemble.
• Material of main parts
| impeller | Cast iron, silicon brass, ductile iron, stainless steel |
| middle shell | Cast iron, ductile iron, stainless steel |
| impeller shaft | carbon steel, stainless steel |
| bearing | Silicon Brass, Rubber, Cylon, Tungsten Carbide |
| motor connector | cast iron, stainless steel |
| Pump seat | cast iron, carbon steel |
| water pipe | carbon steel, stainless steel |
| transmission shaft | carbon steel, stainless steel |
| water filter | stainless steel, carbon steel |
| sealing ring | Silicon brass, stainless steel, Cylon, rubber |
| cable guard | stainless steel, carbon steel |
Related Products
Online Consultation
Manager Chang 13951794560 (same number on WeChat) Email: fuming.chang@beitepump.com
Manager Zhang 13585156185 (same number on WeChat) Email: 286284599@qq.com
Company phone: 025-57155552
Company Address: No. 11, Kangzheng Road, Longchi Street, Liuhe District, Nanjing
Copyright © Nanjing Better Pump Co., Ltd. | SEO